To Next Page

To Previous Page

How to Load Clips

In Cam Selection Mode

To load a clip on the PGM/PGM1 in Cam selection mode:

• With a touchscreen, double-tap the clip you want to load.

• With a keyboard, highlight the clip using the ARROW keys and press ENTER.

The clip is loaded on the PGM/PGM1:

If another clip was already loaded on the PRV/PGM2, it remains loaded on that player

channel. No other clip is loaded on the second play channel.

In Clip Selection Mode

NOTE

See section "Selection Modes" on page 9 to activate the Clip selection mode.

To load clips on the PGM/PGM1 and PRV/PGM2 in Clip selection mode:

• With a touchscreen, double-tap the clip you want to load.

• With a keyboard, highlight the clip using the ARROW keys and press ENTER.

The preferred clip (*) is loaded on the PGM/PGM1.

The secondary clip (=) is loaded on the PRV/PGM2:

Each time you double-tap or press ENTER again, the clip loaded on the PRV shifts to the

PGM, and the clip on the next cam is loaded on the PRV:

For example, if all cam angles from A to H are filled in, and A position is the preferred clip,

and C the secondary clip:

1. Cam A is loaded on PGM and cam C is loaded on PRV

2. Cam C is loaded on PGM and cam B is loaded on PRV

3. Cam B is loaded on PGM and cam D is loaded on PRV

(cam C has already been loaded)

4. Cam D is loaded on PGM and cam E is loaded on PRV

5. ...

14 2. Common Operations

EVS Broadcast Equipment SA Issue 2.12.D- April 2020

EVS LSM Connect User Manual

Questions and Answers: