EVS LSM Connect User Manual

1.2. Starting and Connecting to the EVS
Server
To start LSM Connect and connect to an EVS server, proceed as follows:
1. Tap the LSM Connect icon located on the main (central) home screen.
The LSM Connect application opens in the Settings window, with the Server
Connection menu highlighted.
2. In the Server Connection menu, in the list of available servers, select the Remote
Panel of the EVS server you want to connect to in one of the following ways:
◦ With a touchscreen, tap the relevant Remote button.
◦ With a keyboard, press TAB to highlight the available servers, then press the
keyboard arrows to select the appropriate Remote server button, and finally press
ENTER.
The associated Remote button turns blue:
See section "Available Servers" on page 98 for more information on the Available
Servers parameters.
• If the Multicam version of the EVS server you connect to is compatible with the
version of your LSM Connect, the application initializes.
After initialization, the main window opens with the default view: clip tab on the left,
playlist tab on the right.
• If the Multicam version of the EVS server you want to connect to can work with a later
version of LSM Connect than the one installed, the following message appears.
Click OK and follow the instructions to upgrade the LSM Connect application.
4 1. Introduction
EVS Broadcast Equipment SA Issue 2.12.D- April 2020

EVS LSM Connect Specifications

General

Brand	EVS
Model	LSM Connect
Category	Server
Language	English