EVS LSM Connect User Manual

◦ PLST to regenerate the timecode at the beginning of the playlist
◦ CLIP to regenerate the timecode for each playlist element
4. In the From field, specify the initial TC value to be used for the timecode regeneration.
5. In the In field, specify the TC type in which the timecode should be regenerated.
4.2.5. Consolidating Playlists
Introduction
You can perform the following actions from a local or remote playlist to a local playlist:
• Merging two playlists
• Inserting a playlist within another playlist
It is not possible however to merge or insert a local playlist into a remote one, or a remote
playlist into a remote one.
How to Merge Two Playlists
When you merge two playlists, all playlist elements from the first selected playlist are
added to the end of the second playlist.
To merge two playlists, proceed as follows:
1. Open two playlist panes next to each other, if necessary by changing the view into a
playlist view .
2. In the 1st playlist pane in Playlist Headers view, click the playlist you want to merge
into another one.
3. In the 2nd playlist pane in Playlist Headers view, click the playlist in which the first
selected playlist will be merged.
4. Tap in the Contextual Action bar.
A message is displayed to validate the merge action.
5. Tap OKto confirm the merge action.
TIP
If you tap the button in front of the second playlist in the Headers view,
instead of tapping the playlist number area, LSM Connect will directly prompt
you to insert the first selected playlist into the second one. This has the same
effect as a Merge action.
78 4. Playlist Management
EVS Broadcast Equipment SA Issue 2.12.D- April 2020

EVS LSM Connect Specifications

General

Brand	EVS
Model	LSM Connect
Category	Server
Language	English