Audio is extended from the end of the previous clip and the audio on the clip being edited is
shortened.
How to Insert an Audio Advance
Inserting an audio advance consists of advancing the beginning of the audio transition
compared to the video transition. The Start on Cut and End on Cut are not taken into
account in these editing actions.
To insert an audio advance, proceed as follows:
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press to highlight V Base (SHIFT+A).
4. Press to highlight A Advance (A).
5. Enter a value on the F_ keys including leading zeros (0+2+1+2= 2:12).
6. Or move the lever and press ENTER.
The value entered will be present on the PRV SCREEN when the clip is next to play in a
playlist.
Audio is shortened on the previous clip and the beginning of the clip being edited is
extended.
120 5. Playlist Management
EVS Broadcast Equipment SA Issue 12.05.A- May 2014
To Next Page
Loading...
Need help?
General
