Keyer (K)
To use the keyer (arrows appear/disappear), proceed as follows:
1. Select K on the Paint mode monitor display or press SHIFT+A on the Remote Panel.
2. The drawing will dissolve on and off using the Paint/target transition parameter in the
Operational Setup menu (p.12.1 F1).
Library (L)
To access the drawingsd library, proceed as follows:
1. Select L on the Paint mode monitor display.
2. In the library, you can load or save entire drawings and logos to reuse them.
9.2. Target Mode
9.2.1. Introduction
The Target mode is a software option, which requires the license code 114. For more
information on the required license key, please contact the Support or Sales team.
This software option enables the tracking of an object/action on the video by use of a
circle, arrow, ellipse, or rectangle (called a "tracking object"), focusing the viewer's
attention on specific details.
You can choose the size, color, and thickness of the border as well as the darkness of the
background for a highlight feature. In addition, the Loop function allows you to store this
effect as a clip.
You can operate these functions within the software package using the tablet and the
stylus. Change the pointing device parameter in the Operational Setup menu (p.9.2 F2) to
toggle between the tablet.
Note
The Target mode is not available on EVS servers working with 10-bit codecs.
186 9. Advanced Control Modes
EVS Broadcast Equipment SA Issue 12.05.A- May 2014
To Next Page
Loading...
Need help?
General
