6.2.3. Display in Timeline Mode
On-Screen Display
The screenshot below shows the OSD display when the timeline is loaded in Timeline
Edit mode. The following table briefly describes each information highlighted on the
screenshot.
# Information Type Description
1. Track type (V, A1, A2) Type of track in the timeline: V (Video), A1 (Audio1),
A2 (Audio2).
A timeline created in Multicam always includes two
audio tracks.
2. Timeline ID Timeline number and location on the EVS server.
The timeline 13 is located on page 1, bank 10
(playlist bank), and position 3.
3. Track selection (*) The asterisk shows the selected tracks, to which
the editing actions will be applied.
Tracks are selected using the A, B and C keys on
the Remote Panel.
4. Timeline element (TLE)
LSMID
LSM ID of the current timeline element, that is the
element at the nowline position.
5. Speed (Sp) Playing speed of the current timeline element.
6. Transition effect (Fx) Transition effect applied to the current timeline
element. The transition effect is applied at the
beginning of the timeline element.
7. Transition effect duration Duration of the transition effect.
OPERATION MANUAL Multicam LSM 12.05
6. Timeline Management 133
To Next Page
Loading...
Need help?
General
