The following functions are available to play and browse the current element:
Command Description
ALT+P Play from / Pause on the current picture
ALT+Y Play the current clip in endless loop mode. The play will start from
the current picture until the Short OUT point of the clip, then will
automatically loop back to the Short IN point and keep playing, and
so on…
ALT+V PlayVar at the speed specified in the adjacent field. To edit the Var
speed, press ALT+% (without SHIFT key), type the desired value
and press ENTER to confirm.
< / > Move 1 field backward / forward
SHIFT+< / > Move 1 second backward / forward
CTRL+< / > Fast Rewind+Fast Forward. The browsing will continue after the
keys are released.
ALT+< / > Goto IN / OUT
ALT+G Goto timecode
After loading the desired clip, the following edition functions are available:
Command Description
ALT+N Renames the clip. Type the desired name and press ENTER to
confirm or ESC to cancel.
ALT+I / ALT+O Marks a new Short IN / Short OUT point on the current picture. The
cursor is automatically placed in the adjacent field, so that the
operator can manually enter the timecode of the desired Short IN /
Short OUT point if needed. Press ENTER to confirm, or ESC to
cancel.
In the Recorder Window
OPERATION MANUAL Multicam LSM 12.05
4. Clip Management 51
To Next Page
Loading...
Need help?
General
