Excell NC RACER EX-2001 - Status Information; Units and Terminators; Command Mode Interface

EX-2001 NC RACER ZSME300000091
25
EXCELL PRECISION CO., LTD.
Status
Stable: display “blank” Unstable: display “M” Over load: display “O”
Units
Kg, g, t, lb or “blank”
Terminators
CR, LF is the data finish code.
2
Command mode
COMMAND FUNCTION
READ, RW Reads weight
ZERO, MZ Back to zero
TARE, MT Tare
NTGS Switches gross / net weight
MG Displays gross weight
MN Displays net weight
CT Clears tare
n The command string must be terminated with CR ( 0DH ) , LF ( 0AH ).
o If a wrong command is received, the indicator will reply “E” + “ error command ”.
p If the command mode has been selected “with address”, (FUNC. 61 = 4)
then every command must be preceded with an indicator address in the format:-
“ @ address ”
Example: To read the weight value form indicator addressed as 01 (“01” selected in
FUNC. 67) The complete command is @01RW<CR><LF>