Setting up Your Fiber Inspection Probe and ConnectorMax2 Mobile
Fiber Inspection Probe 39
Setting up Autonaming
4. Under File Name Edition, you can customize the information
displayed next to Custom file name.
Note: You can edit information either with the virtual keyboard or with the
microphone. A microphone is part of the virtual keyboard on your smart
device.
5. If you want to select the separator in the automatic numbering section,
tap the line next to Separator.
5a. Navigate through the separators by scrolling through the words
that are greyed.
5b. Tap Done to confirm your choice.
6. Tap Done to confirm your new settings and to return to the main
window.
The new settings will apply the next time you perform a capture.
To Next Page
Loading...
