Expert SmartTurn - Page 51

Turntable control SmartTurn
Installation and commissioning
Dok-ID:EXPERT-0003-EN-2011 51
Pos: 5.20 /S martT ur n/S mar tTur n-Neu-0 2.2 011/ 5.2 -b Ablauf der Inbetriebnahme @ 3\mod_1315556372255_38.doc @ 30130
Position of the position encoder when commissioning in
reverse mode.
Fig. 24 Position encoder in reverse mode
1 Blocked area +/- 45 degrees in front of 0-position.
2 Permitted range.
3 Position of the position encoder.
4 Movement range.
Pos: 5. 21 /Smar tTur n/5.4 Wi eder inbetr iebn ahme @ 1\mod_1219672509958_38.doc @ 7466