Extreme Networks ExtremeSwitching SLX 9540 - Power Supply Precautions

FIGURE 43 DC power supply
1. Release lever
2. Power supply handle
Precautions
specic to power supplies
DANGER
Make sure that the power source circuits are properly grounded, then use the power cord supplied with the device to
connect it to the power source.
DANGER
If the installation requires a dierent power cord than the one supplied with the device, make sure you use a power cord
displaying the mark of the safety agency that denes the regulations for power cords in your country. The mark is your
assurance that the power cord can be used safely with the device.
CAUTION
Disassembling any part of the power supply and fan assembly voids the warranty and regulatory certications. There are no
user-serviceable parts inside the power supply and fan assembly.
Precautions specic to power supplies
ExtremeSwitching SLX 9540 Hardware Installation Guide
9036360-00 Rev AB 79