Worst case operational temperature is measured at sea level with at least 4 fan assemblies, with maximum power consumption optics
modules (5W QSFP28) fully loaded.
Power supply specications (per PSU)
Power supply model Maximum
output power
rating (DC)
Input voltage Input line frequency Maximum input
current
Input line
protection
Maximum inrush
current
BR-ACPWR-650-F 650 W 100-240V~ 50-60Hz 12 A Fuses 35A
BR-ACPWR-650-R 650 W 100-240V~ 50-60Hz 12 A Fuses 35A
BR-DCPWR-650-F 650 W -48 - 60V - 13.3 A Fuses 40A
BR-DCPWR-650-R 650 W -48 - 60V - 13.3 A Fuses 40A
Power consumption (typical conguration)
All 100-GbE ports are linked up, loading with 10 percent trac rate. Five fan assemblies. Fans at nominal speed.
@100 VAC Input (Input power ±5%) @200 VAC Input (Input
power ±5%)
@-48VDC Minimum number of
power supplies
Notes
169 W
577 BTU/hr
166 W
566 BTU/hr
168 W
573 BTU/hr
1 x 650 W AC
1 x 650 W DC
1 power supply
178 W
607 BTU/hr
176 W
601 BTU/hr
179 W
611 BTU/hr
1 x 650 W AC
1 x 650 W DC
2 power supplies
Power consumption (maximum conguration)
All 100-GbE ports are linked up, loading with 100 percent trac rate. Two power supplies and ve fan assemblies. Fans at high speed.
@100 VAC Input (Input power ±5%) @200 VAC Input (Input
power ±5%)
@-48VDC Minimum number of
power supplies
Notes
570 W
1,945 BTU/hr
544.1 W
1,857 BTU/hr
552 W
1,884 BTU/hr
1 x 650 W AC
1 x 650 W DC
1 power supply
581.2 W
1,983 BTU/hr
562.4 W
1,919 BTU/hr
563 W
1,921 BTU/hr
1 x 650 W AC
1 x 650 W DC
2 power supplies
Data port specications (Ethernet)
System component Description Maximum ports
supported
QSFP28 ports 100 GbE QSFP28 ports 6
SFP+ ports The SFP+ ports can support 10GbE/1GbE interfaces. There are 48 x SFP+ ports. 48
Ethernet management port RJ-45 port with 10/100/1000 Mbps auto-negotiating capability 1
Data port specications (Ethernet)
ExtremeSwitching SLX 9540 Hardware Installation Guide
9036360-00 Rev AB 93