EasyManua.ls Logo

Extreme Networks ExtremeSwitching SLX 9540 - Serial Port Specifications (Pinout RJ-45); Serial Port Specifications (Pinout - Mini-USB); Serial Port Specifications (Protocol); Memory Specifications

Extreme Networks ExtremeSwitching SLX 9540
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Serial port specications (pinout RJ-45)
Pin Signal Description
1 Not supported N/A
2 Not supported N/A
3 RXD Receive data
4 GND Logic ground
5 Not supported N/A
6 TXD Transmit data
7 Not supported N/A
8 Not supported N/A
Serial port specications (pinout - mini-USB)
Pin Signal Description
1 Reserved Not used
2 UART0_RX Debug port (data received by SLX)
3 UART0_TX Console port (data transmitted by SLX)
4 Reserved Not used
5 GND Ground
Serial port specications (protocol)
Parameter Value
Baud 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
Memory specications
Parameter Type Size
Main memory DDR4 16 GB
Boot ash NOR Flash 32 MB
SSD M.2 SATA III (2 slots) 64 GB per slot
Serial port specications (pinout RJ-45)
ExtremeSwitching SLX 9540 Hardware Installation Guide
94 9036360-00 Rev AB

Table of Contents

Related product manuals