Extreme Networks ExtremeSwitching SLX 9540 - Precautions Specific to Fan Assemblies

FIGURE 48 Fan assembly
1. Captive screw 2. Fan assembly handle
Precautions specic to fan assemblies
DANGER
Be careful not to accidently insert your ngers into the fan tray while removing it from the chassis. The fan may still be
spinning at a high speed.
CAUTION
Disassembling any part of the power supply and fan assembly voids the warranty and regulatory certications. There are no
user-serviceable parts inside the power supply and fan assembly.
CAUTION
Ensure that the airow direction of the power supply unit matches that of the installed fan tray. The power supplies and fan
trays are clearly labeled with either a green arrow with an "E", or an orange arrow with an "I."
CAUTION
If you do not install a module or a power supply in a slot, you must keep the slot ller panel in place. If you run the chassis
with an uncovered slot, the system will overheat.
Precautions specic to fan assemblies
ExtremeSwitching SLX 9540 Hardware Installation Guide
86 9036360-00 Rev AB