Extron electronics IN1804 Series - Page 71

IN1804 Seamless Scaling Switchers • SIS Configuration and Control 63
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Picture Adjustments
Freeze
Enable
1*1F Frz1*1
]
Freeze the output on the screen.
Disable
1*0F Frz1*0
]
Unfreeze the output.
View
1F
X1)]
Show the freeze status of the output.
KEY:
X1)
= On or Off status
0 = Off or disabled
1 = On or enabled (default)
Contrast
Set a specific value
EX!
*
X1%
CONT
}
Cont
X!
*
X1%]
Set the range of image light and dark
values (contrast level) to
X1%
for input
X!
.
Increment contrast value
EX!
+CONT
}
Cont
X!
*
X1%]
Increment contrast level
X1%
for input
X!
.
Decrement value
EX!
– CONT
}
Cont
X!
*
X1%]
Decrement contrast level
X1%
for input
X!
.
View contrast
EX!
CONT
} X1%]
View the current contrast level for input
X!
.
Brightness
Set a specific value
EX!
*
X1%
BRIT
}
Brit
X!
*
X1%]
Set the intensity of video light on the
screen (brightness level) to
X1%
for the
current input.
Increment value
EX!
+ BRIT
}
Brit
X!
*
X1%]
Increment brightness level
X1%
for input
X!
.
Decrement value
EX!
–BRIT
}
Brit
X!
*
X1%]
Decrement contrast level
X1%
for input
X!
.
View
EX!
BRIT
} X1%]
View the current brightness level for
input
X!
.
Detail Filter
Set detail level
E
1*
X1%
HDET
}
Hdet1*
X1%]
Specify the detail (sharpness) level to
X1%
.
Increment value
E
1+HDET
}
Hdet1*
X1%]
Increment the detail level.
Decrement
E
1–HDET
}
Hdet1*
X1%]
Decrement the detail level.
View
E
1HDET
} X1%]
View current detail setting
X1%
for the
input.
KEY:
X!
= Input selection
1 = DisplayPort input 1 (all models)
2 = HDMI or DVI input 2 (all models)
3 = HDMI or DVI input 3 (all models)
4 = HDMI or DVI (standard and DO models)
TP (IN1804 DI and DI/DO)
X1%
= Picture adjustment
0-127 (default = 64)