Installation manual
CNC 8035
4.
MACHINE PARAMETERS
General machine parameters
(SOFT M: V15.3X)
(S
OFT T: V16.3X)
·86·
PRBXMIN (P40) PRBXMAX (P41) PRBYMIN (P42)
PRBYMAX (P43) PRBZMIN (P44) PRBZMAX (P45)
Indicate the position of the tabletop probe used for tool calibration.
These position values must be absolute and with respect to machine reference zero (home). If a
lathe model CNC, these values must be in radius.
PRBMOVE (P46)
Indicates the maximum distance the tool can travel when calibrating it with a probe in JOG mode.
USERDPLY (P47)
Indicates the number of the user program associated with the execution mode. This program will
be executed via the user channel when pressing the softkey USER in the EXECUTE mode.
USEREDIT (P48)
Indicates the number of user program associated with the Edit mode. This program will be executed
via the user channel when pressing the softkey USER in the EDIT mode.
Possible values
±99999.9999 mm or ±3937.00787 inches.
Default value: 0
PRBXMIN Probe’s minimum X coordinate.
PRBXMAX Probe’s maximum X coordinate.
PRBYMIN Probe’s minimum Y coordinate.
PRBYMAX Probe’s maximum Y coordinate.
PRBZMIN Probe’s minimum Z coordinate.
PRBZMAX Probe’s maximum Z coordinate.
Possible values
Between 0.0001 and 99999.9999 millimeters.
Between 0.00001 and 3937.00787 inches.
Default value: 50 mm.
Possible values
Integer numbers between 0 and 65535.
Default value: 0 (none)
Possible values
Integer numbers between 0 and 65535.
Default value: 0 (none)
To Next Page
Loading...
