To Next Page

To Previous Page

2.User information >

2.14 Washing

All ovens have automatic washing programmes.

1. Basic spray wash. For models without washing (No Washing).

2. Automatic washing with solid detergent. SWL models (Solid Washing System)

3. Automatic washing with liquid detergent. LWL models (Liquid Washing System)

2.14.1 Basic spray wash

Wash selector. Press the selector to access the washing options menu.

The menu consists of three different programmes:

1. Rinse

2. Medium wash

3. Intense wash

For options 2 and 3, the oven will perform a pre-softening using steam and then there will

be an audible alarm and an image of a spray bottle to indicate that the spray must be

applied. Ensure that the detergent is evenly distributed over the entire surface of the

cooking chamber, fan guard and tray holder. Press Start/Stop to validate.

2.14.2 Automatic solid wash

Wash selector. Press the selector to access the washing options menu.

The menu consists of six different programmes:

2.14.2.1 Rinse

2.14.2.2 Gentle Wash

2.14.2.3 Medium wash

2.14.2.4 Intense wash

2.14.2.5 Polish

2.14.2.6 Spray

The control knob can be used to navigate between the different programmes. Each wash

programme consists of different phases. The duration of each phase is displayed in each

wash programme. To start the wash programme, select the desired wash programme

and Start/Stop.

Follow the instructions on the display for each wash programme.

If the chamber temperature is above 45°C, the oven automatically

performs a cool down.

Fagor CONCEPT User Manual

Questions and Answers: