Faraday MPC-6000 - APPENDIX-B: Compatible Devices; Addressable Device Compatibility

MPC-6000 / MPC-7000 / RND-2 INSTALLATION, OPERATION AND MAINTENANCE MANUAL
60
Addressable Device Circuit Wire Selection Guide
Each addressable device circuit must meet the following requirements:
 Total loop resistance - 50 ohm maximum with 252 devices. (Refer to following graph.)
 Total loop capacitance - 0.5uF max line to line and 1.0uF max line to shield
Line Resistance Graph
The terminal blocks of Faraday X1 devices are rated for a maximum of 14AWG wire.
110
130
260
10
240
120
230
260
100
250
90
180
220
80
240
210
70
200
60
180
5
0
170
170
230
40
160
160
220
190
100
30
150
Note: The total number of devices can not exceed 252.
150
210
90
200
80
FDLC LINE RESISTANCE vs MAX NUMBER OF DEVICES
190
70
140
Max Number of Devices Per Loop
60
130
50
110
120
1 40
Li ne Resistance (ohm)
20
250