EasyManua.ls Logo

Faraday MPC-6000 - Notification Appliance & Auxiliary Output Compatibility; APPENDIX-E: Alarm Verification

Faraday MPC-6000
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MPC-6000 / MPC-7000 / RND-2 INSTALLATION, OPERATION AND MAINTENANCE MANUAL
66
DEVICES FOR NOTIFICATION APPLIANCE CIRCUITS
Refer to P/N 315-096363FA for a list of compatible notification appliances.
Accessory Devices
Faraday Cat.
No.
Mfg. Part Number Description
Faraday
R711-1 711-1 Polarized Auxiliary Relay
RSE 300 RSE-300 Remote Signal Expander
1. The accessory devices listed above may be wired to activate from the notification appliance circuits.
2. For specific wiring and installation information, read the instructions provided with each device.
3. Controlled device/equipment must be within 3 feet of R711-1.
DEVICES FOR AUXILIARY POWER OUTPUTS
The following lists compatible devices for the auxiliary power outputs.
Relays
Four Wire (Separately Powered) Heat & Smoke Detectors. See Devices for Initiating
Device Circuits.
Relays
Faraday Cat.
No.
Mfg. Part Number Description
Faraday
R711-1 711-1 Remote Relay Unit
Notes:
1. The accessory devices listed above may be wired to the auxiliary power outputs.
2. For specific wiring and installation information, read the instructions provided with each device.
3. Controlled device/equipment must be within 3 feet of R711-1.

Table of Contents

Other manuals for Faraday MPC-6000

Related product manuals