Feig Electronic VEK MNH2-R24-C User Manual

VEK MNH
Product description
VEK MNH Operating Manual v1.3 en
19 | 56
6 Product description
Induction loop detectors such as traffic detectors are electronic sensors for inductive detection of metallic
objects. Using induction loops, for example, vehicles are detected, and depending on the device, their design
and direction of movement.
The traffic detectors are operated in combination with various induction loops and electronic controller, such
as frequency converters or PLC controller.
The areas of application are, for example, the detection, monitoring and counting of vehicles in the areas of
traffic engineering, door and barrier controller, parking and tunnel monitoring as well as traffic light systems.
6.1 Product versions
The Verkehrsdetektor is available in the following variants:
Product name
Features
VEK MNH1-R24-A
• 1 Channel for one induction loop
• 2 Relay outputs
• 8-pole DIP switch for configuration
• USB diagnostic interface
• Reset button
• 24 V supply voltage
• TS35 DIN rail mounting
• Plastic housing
VEK MNH2-R24-C
• 2 Channels for two induction loops
• 2 Relay outputs
• 8-pole DIP switch for configuration
• 4-pole DIP switch for configuration
• USB diagnostic interface
• Reset button
• 24 V supply voltage
• TS35 DIN rail mounting
• Plastic housing
VEK MNH2-O24-D
• 2 Channels for two induction loops
• 4 Open collector outputs
• 8-pole DIP switch for configuration
• 4-pole DIP switch for configuration
• USB diagnostic interface
• Reset button
• 24 V supply voltage
• TS35 DIN rail mounting
• Plastic housing
Tab. 7: Product variants

Feig Electronic VEK MNH2-R24-C Specifications

General

Brand	Feig Electronic
Model	VEK MNH2-R24-C
Category	Security Sensors
Language	English