Contents and general instructions
V
Festo P.BE−CPV−EN en 0503g
Designated use
The CPV valve terminals described in this manual are in
tended for fitting into a machine or automated system. The
user must at all times observe the safety regulations speci
fied in this manual as well as the instructions concerning the
designated use of the relevant CPV valve terminal. CPV valve
terminals may
only be used as follows:
in accordance with designated use
in their original state
without any modifications by the user
in faultless technical condition.
When used together with commercially available compo
nents, such as sensors and actuators, the specified limits for
pressures, temperatures, electrical data, torques etc. must be
observed. National and local safety regulations
must also be
observed.
Warning
If the terminal is to be used as an explosion−proof operat
ing media, make sure that:
· the electrical connections are not disconnected when
power is applied.
· the completely fitted product with all plugs, adapters
and protective caps used complies at least with protec
tion class IP64.
To Next Page
Loading...
