Festo CPX-CEC - Page 20

1. System summary
1−4
Festo P.BE−CPX−CEC−EN en 1004a
CPX−CEC−C1 offers...
A CANopen interface to which up to 31 CANopen slaves
can be connected
CPX−CEC−M1 offers...
 The CoDeSys software package SoftMotion for
coordinated multi−axis movements.
 CPX−CEC−M1 can alternatively also be operated as a
CANopen master. The SoftMotion functions are then not
available.
CPX−CEC offers...
An RS232 interface (Sub−D, 9−pin) for connecting a type
FED
operator unit or for operating external devices.
With external devices, data communication must be
programmed by the user.