1. System summary
1−9
Festo P.BE−CPX−CEC−EN en 1004a
1.4 The CoDeSys provided by Festo programming environment
Use CoDeSys provided by Festo to commission and program
the CoDeSys controller. CoDeSys provided by Festo offers a
convenient user interface with the following functions:
Configuration and parameterisation of the CPX−CEC/
CPX−CEC−... with control configuration
Programming as per IEC 61131−3
Integrated module libraries
Library administrator to integrate additional libraries
Simulation mode, permits testing of projects
on the PC,
without PLC
Visualisation with the integrated visualisation editor
Documentation with the integrated project
documentation
Debugging functions: testing program sequence,
observing and changing variables, error search
CPX−CEC−M1: SoftMotion programming editors are
integrated.
To be able to use a controller (target) under CoDeSys
provided by Festo, a so−called Target Support Package is
needed for
the corresponding target. This permits access to
the system functions of the target and contains
corresponding information in the form of online help. The
Target Support Package makes CoDeSys functions usable for
the respective device or limits them, if necessary.
With the Target Support Package, CoDeSys can support all
these characteristics and functions of
these devices.
And so CoDeSys provided by Festo contains many functions
that are available only on certain devices.
To Next Page
Loading...
