A. Technical appendix
A−4
Festo P.BE−VTSA−44−EN en 0509NH
General information VTSA−...−A1−...
(size 26 mm)
VTSA−...−A2−...
(size 18 mm)
Weights (in g)
Left−hand end plate (CPX terminal)
Per complete CPX module
Pneumatic interface
Multipol (Sub−D, cage clamp, M23 round plug)
Per pneumatic supply plate with exhaust plate
or exhaust cover
Right−hand end plate (axial connections)
1)
Right−hand selector end plate
1)
Approx. 80 g
Approx. 210 g
1470 g
550 g
617 g
Approx. 521 g
Approx. 342 g
(2 valve locations) per manifold block)
1)
Per angled sub−base
1)
Per valve
Per cover plate for non−assigned valve location
Per pressure regulator plate (P)
Per pressure regulator plate (A or B)
Per pressure regulator plate (AB)
Per throttle plate
Per vertical supply plate
1)
Per vertical pressure shut−off plate
Approx. 760 g
230 g
Approx. 320 g
73 g
429 g
483 g
743 g
320 g
191 g
273 g
Approx. 569 g
170 g
Approx. 190 g
34 g
702 g
1060 g
1304
228 g
140g
209 g
1)
With screw connector
Tab.A/1: General technical specifications of the VTSA valve terminal
Please note
If the valve terminal is fitted onto a wall, additional
fastenings (brackets) must be fitted after every 2 or max.
4 manifold blocks, depending on the vibration/shock
loading (see Tab.A/2).
To Next Page
