2. Fitting
2−4
Festo P.BE−VTSA−44−EN en 0509NH
2.1 General instructions on fitting and dismantling
Warning
Sudden unexpected movements of the connected
actuators and uncontrolled movements of loose tubing
can cause injury to human beings or damage to property.
Before carrying out installation and maintenance work,
switch off the following:
the compressed air supply
the operating and load voltage supplies.
Please note
Handle all modules and components of the valve terminal
with great care. Please note especially the following:
The specified torques must be observed.
Electrostatically sensitive components
Do not therefore touch any contact surfaces.
Valve terminals with multipin node Sub−D:
Protect the open MP connection against humidity, dirt
and dust etc. before the connecting
cable is fitted.
To Next Page
Loading...
