Festo VTSA-FB - Dismantling the MPA Valve Terminal

5. Maintenance and conversion
5−9
Festo P.BE−VTSA−44−EN en 0509NH
5.3.2 Replacing/adding components for vertical stacking
The valve terminal can be fitted with the following
components for vertical stacking:
 pressure regulator plate
 throttle plate
 vertical pressure shut−off plate
 vertical supply plate.
Please note
No valve function.
Do not combine standard 2x3/2−way valves (identifier
T32C−A / T32U−A / T32H−A) with reversible pressure regu
lator plates (identifier R5−...6 or R5−...−10). With this com
bination the pneumatic spring of the valves does not func
tion. The valves cannot return from the switching position
to the basic position.
Vertical stacking
with pressure regulator plate:
In the combination pressure regulator plate with throttle
plate, vertical pressure shut−off plate or vertical supply plate
you can mount the above−mentioned components under the
pressure regulator plate. You thereby guarantee free access
to the adjusting screws and connections (see Tab.5/2).