Contents and general instructions
VII
Festo P.BE−VTSA−44−EN en 0509NH
Designated use
The VTSA valve terminals described in this manual are in
tended for fitting into a machine or automated system. The
user must at all times observe the safety regulations speci
fied in this manual as well as the instructions concerning the
designated use of the relevant VTSA valve terminal. The VTSA
valve terminals
may only be used as follows:
as designated in industrial applications
without any modifications by the user.
Only the conversions or modifications described in the
documentation accompanying the product are permitted.
in faultless technical condition.
When used together with commercially available compo
nents, such as actuators, the specified limits for pressures,
temperatures, electrical data,
torques etc. must be observed.
National and local safety regulations must also be observed.
Target group
This manual is directed exclusively at technicians trained in
control and automation technology.
Service
Please consult your local Festo repair service if you have any
technical problems.
To Next Page
Loading...
