Fiat FIORINO 2021 - Page 51

49
Versions with split rear seat
83 F0T0289
To further expand the boot, pull the
tabs (A) and (B) fig. 83 located behind
the backrest of the rear seats and tip
seats and backrest forwards.
A
84 F0T0447
To fix the seat, take the red cords (A)
shown in fig. 84 and fix the ends of the
cords in position (A) and (B) as in fig. 85
for each of the two portions of the seat.
A
B
85 F0T0448
Rear seat removal (Qubo versions)
The rear seat can be removed to carry
large loads and expand the boot even
further.
WARNING To remove the rear seat,
first disconnect the SBR sensor
connection on both the right and left
sides, as shown in fig. 86. Turn the ring
(A) anticlockwise to disconnect the
connector.
86 F0T0987
Operate the two brackets (A) fig. 87
under the side of the seat (one on each
side) after having tipped the rear seat
as previously described.
87 F0T0455
Rear seat removal (Fiorino Combi
versions)
The rear seat can be removed to carry
large loads and expand the boot even
further.