Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
FIBOCOM L860-GL Series Hardware Guide Page 54 of 60
5 ESD Characteristics
The module is generally not protected against Electrostatic Discharge (ESD). ESD handling precautions
that apply to ESD sensitive components should be strictly followed. Proper ESD handling procedures
must be applied throughout the processing, handling, assembly and operation of any application with
module. The ESD characteristics are shown in the following table (Temperature: 25°C, Relative Humidity:
40%).
Note：
ESD performance is based on EVB-M2 development board.
To Next Page
Loading...
Need help?
General
