Spectrum Color Display: Fixed Luminance
The user can fix the luminance of the displayed color. Since antireflective coatings, for example,
are inherently transmitting, the spectra has very little luminance and the coating color may appear
black on screen. Fixing the luminance does not affect the color space coordinate results.
Spectrum colors of the same spectrum with fixed luminance of 0%, 30%, and 60%, respectively.
Note that fixing the luminance to view the color does not affect the color space coordinate values.
Configuring Number of Spectra
This sets the maximum number of spectra displayed simultaneously on the main FILMeasure
screen. If the maximum number of spectra is reduced to fewer than the number already on the
screen, the most recently selected spectra will remain.
Graph Color Background
The background of the graph color can be set to white or black using this option.
Significant Figures
For systems with the thickness upgrade, the user can select the number of significant figures that
the results display.
Access Control
The software for the instrument incorporates password protection to limit access to the meas-
urement software and settings. When the software is initially installed the access control is turned
off. The software will automatically boot up with Engineer level access that enables access to all
features of the program except turning on and off access control and adding and deleting users.
To Next Page
Loading...
Need help?
General
