MNL004_EN rev. F
Pag. 13 di 56
3.6.1 ELECTRICAL PROTECTIONS
Fiocchetti devices are equipped with 2 safety fuses (phase and neutral) with integral protection against electric shocks,
short circuits and over-currents, and according to the standards for laboratory devices.
The fuses can be accessed from the front: open the refrigerator door and the fuses will be found behind the front
control unit panel. The replacement must be done by qualified personnel.
Figure 4 – Fuse housing
3.7 SET-UP OPERATIONS
Before turning on the appliance, it is necessary to check that it has not been damaged during transport, handling and
installation.
- Check the condition of the packaging (it must not show dents and/or breakages)
- Check the condition of the external frame (it must not show dents and/or breakages)
- Check the condition of the power cord (it should not have scratches or cuts).
- Check that the feet and/or wheels are stable.
- Check that door opens correctly and closes hermetically
- Check door gaskets (they should not have scratches or cuts)
- Check that display do not show cracks.
3.8 USE OF THE INTERNAL COMPARTMENT AND MATERIAL STORAGE
The stainless-steel rack system allows for the installation of fully extractable drawers on telescopic guides with "bayonet
connection" and with the possibility of having a mixed arrangement of completely interchangeable drawers/shelves
SUPERARTIC and PLASMA SUPERARTIC models use drawers mounted on extractable slides, not telescopic.
Figure 5 – Slots for internal fittings
To Next Page
Loading...