MNL004_EN rev. F
Pag. 39 di 56
4.3.3.12 Special function: TEST
Press for some seconds to activate the function TEST. This function checks the integrity of the alarm system,
running a test of the following functions:
- Battery charge test
- Buzzer integrity (continuous sound for 4 sec.)
- Acoustic and visual simulation of the low temperature alarm (Probe a)
- Acoustic and visual simulation of the high temperature alarm (Probe a)
- Acoustic and visual simulation of the low temperature alarm (Probe b) (if installed)
- Acoustic and visual simulation of the high temperature alarm (Probe b) (if installed)
- Door micro-switch integrity (the display will ask to open and close the door)
- Dry contacts test
- Latest memory reset test
To Next Page
Loading...