MNL004_EN rev. F
Pag. 14 di 56
3.8.1 SHELVES INSTALLATION
Position the shelf supports on the rack at the desired position, inserting them into the special slots and turning them of
90° to block them. At this point, insert shelves (Figure 6 – shelves installation)
Figure 6 – shelves installation
3.8.2 DRAWERS INSTALLATION
Insert the guides into the special slots of racks (Figure 7) and pull out the telescopic guides by gently pressing on the
white lever (Figure 8), install them on the drawer (Figure 9) and fill the drawer on the guides installed on racks (Figure
10).
To Next Page
Loading...