Commissioning HyPower-Geko
110 FläktGroup DC-2014-0022-GB 2018-05/R5 • Subject to modifications
Procedure for activating „autonomous operating mode“ or „economy mode“:
• Switch the unit on.
• Couple input terminals.
9 The unit switches into "free operating mode" or "economy mode".
Procedure for activating „unit off“:
• Switch the unit on.
• Couple input terminals.
9 The unit switches off (attention: no frost protection function).
Procedure for activating
„heat request“:
• Switch the unit on and increase the setpoint until the unit starts heating.
9 Contact "heat request" closes.
Procedure for activating
„cool request“:
• Switch the unit on and decrease the setpoint, until the unit starts cooling.
9 Contact "cooling request" closes.
To Next Page
