HyPower-Geko Electrical connection
FläktGroup DC-2014-0022-GB 2018-05/R5 • Subject to modifications 77
6.10 Electrical connection for AC fan with FläktGroup miniature switches CMS and CMT
6.10.1 Unit connecting terminals for configurations with terminal strip and relay PCB
Fig. 6-33: Connecting terminals
1 ) Condensate pump is optional
2)
Connect valves, if these are available in the unit configuration. Otherwise only fan control.
*) The connections highlighted light gray were executed at the factory.
This view provides a better visualization of the switches.**) Fan control (terminal diagram depending on selected
rotational speed combination, see wiring diagram in the electric switch cabinet.
Number of wires in the line: e.g.: 5 x 1.5 mm² NYM
relay PCB
To Next Page
Loading...
