FläktGroup HYPOWER-GEKO - Default Chapter; Table of Contents

Table of Contents HyPower-Geko
4 FläktGroup DC-2014-0022-GB 2018-05/R5 • Subject to modifications
1 Safety and User Instructions ......................................................6
1.1 Availability of the operation manual ....................................... 6
1.2 Symbols used ........................................................................ 6
1.3 Safety instructions: warning and danger symbols ................. 6
1.4 Safety-conscious work procedures ........................................ 7
1.5 Personnel selection and qualification .................................... 8
1.6 Proper use ............................................................................. 8
1.7 Improper use ......................................................................... 9
1.8 Safety regulations and codes ................................................ 9
1.9 Modifications and changes .................................................... 9
1.10 Spare parts .......................................................................... 9
2 Technical Description ...............................................................10
2.1 Basic unit components ........................................................ 10
2.2 Material specification ........................................................... 12
2.3 Range of application ............................................................ 12
2.4 Dimensions ......................................................................... 15
2.5 Unit data .............................................................................. 18
2.6 Condensate pump ............................................................... 19
2.7 Air side accessories ............................................................ 21
2.8 Commission Regulation (EU) 2016/2281 ............................ 22
3 Shipping and storage ................................................................24
3.1 Transport safety .................................................................. 24
3.2 Packaged content ................................................................ 24
3.3 Packaging ............................................................................ 24
3.4 Transport ............................................................................. 24
3.5 Temporary storage .............................................................. 25
3.6 Disposal ............................................................................... 25
4 Mounting ....................................................................................26
4.1 Installation site ..................................................................... 26
4.2 Recommended service opening for maintenance work
on the basic unit ........................................................................ 27
4.3 Pre-installation work ............................................................ 29
4.4 Unit mounting ...................................................................... 30
5 Hydraulic Connection ...............................................................41
5.1 General ................................................................................ 41
5.2 Overview of valves .............................................................. 41
5.3 Heating and cooling connections for units without valves
or with on-site valves provided by others .................................. 43
5.4 Heating and cooling water connections for units with
factory-mounted valves ............................................................. 46
5.5 Connecting condensate drain .............................................. 51
5.6 Connecting condensate pump ............................................. 52
6 Electrical connection ................................................................54
6.1 Connection diagrams .......................................................... 54
6.2 Terminal box or electric switch cabinet ................................ 54
6.3 Fan speed ........................................................................... 55
6.4 Connection with controls provided by others ....................... 56