A Menu Structure FLUXUS G60x
UMFLUXUS_G6V4-2EN, 2011-03-29 173
input of the duration over which a floating aver-
age of the measured values has to be deter-
mined
range: 1...100 s
activation of the data logger
activation of the measured value transmission
to a PC or a printer via the serial interface
selection of the storage rate for storing mea-
sured values in the data logger
This display will only be indicated if Output
Options\Store Meas.Data and/or Seri-
al Output are activated.
Input of the storage rate if Storage Rate =
EXTRA has been selected
range: 1...43 200 s (= 12 h)
Current Loop
activation of a current output
This display will only be indicated if the current
output has been installed in Special
Funct.\SYSTEM settings\Proc. out-
puts.
selection whether the sign of the measured val-
ues is to be considered for the output
This display will only be indicated if Current
Loop is activated.
input of the lowest/highest measured value to
be expected for the current output
The values are assigned to the lower/upper limit
of the output range.
These displays will only be indicated if Cur-
rent Loop is activated.
cold start
resistant
Storage Rate ↕
Once per 10 sec.
Current Loop
I1: no >YES<
Meas.Values
>ABSOLUT< sign
Zero-Scale Val.
0.00 m3/h
Full-Scale Val.
300.00 m3/h
To Next Page
Loading...
