Flexim FLUXUS G601 - Sound Path Input Settings; Transducer Distance Input Settings; Temperature Correction Activation; Error Value Delay Selection

178 UMFLUXUS_G6V4-2EN, 2011-03-29
FLUXUS G60x A Menu Structure
setting of the display for the input of the sound
path in the program branch Measuring:
• user: a value for the number of sound paths
will be recommended. This value can be
changed.
• auto: selection of reflection mode or diago-
nal mode.
recommended setting: user
setting for the display for the input of the trans-
ducer distance in the program branch Measur-
ing:
• user: only the entered transducer distance
will be displayed if the recommended and the
entered transducer distances are identical
• auto: only the recommended transducer dis-
tance will be displayed
recommended setting: user
activation of the menu item for the input of a
correction value (offset) for each temperature
input in the program branch Measuring
selection of the error value delay
• damping: The damping factor will be used.
• edit: The menu item for the input of the error
value delay in the program branch Output
Options will be activated.
x
activation of the display of the alarm state dur-
ing the measurement
x
SYSTEM settings\Proc. inputs
selection of the displays for the setting of the in-
puts of the transmitter
cold start
resistant
Sound Path
auto >USER<
Transd. Distance
auto >USER<
Tx Corr.Offset
off >ON<
Error-val. delay
damping >EDIT<
SHOW RELAIS STAT
off >ON<
SYSTEM settings ↕
Proc. inputs