7 Connection
FLUXUS G801 7.1 Transducers
61
UMFLUXUS_G801V1-0EN, 2020-06-26
7.1.1.2 Transducer cable with stainless steel conduit and stripped ends
• Remove the blind plug for the connection of the transducer cable.
• Insert the transducer cable into the housing.
• Fix the transducer cable by tightening the cable gland.
• Connect the transducer cable to the terminals of the transmitter.
Tab. 7.2: Terminal assignment
terminal connection
AV transducer (brown cable, marked white)
AVS transducer (red cable)
ARS transducer (red cable)
AR transducer (brown cable)
Fig. 7.5: Connection of the transducer cable with stainless steel conduit and stripped ends to the transmitter
FLUXUS *801**-A10****-AA, *801**-A10****-AP
FLUXUS *801C24, *801**-A10****-FF
1 – cable gland
1
1
To Next Page
Loading...
