436-0100-01-10, Rev. 200 Duo User Guide
Information on this page is subject to change without notice
4 Connecting to the Camera
This section describes the properties and methods of interfacing with the FLIR Duo, both
mechanically and through software.
4.1 Mechanical Interface
4.1.1 Size / Weight
The overall size of the Duo is 58.9 mm x 40.9 mm x 30 mm (2.32 x 1.61 x 1.19 in), including the lens
but excluding cables and buttons (which protrude slightly). Weight is approximately 65 grams (2.3
oz.). These mechanical specifications do not take into account any additional mounting hardware.
For additional details, please see the Duo Technical Drawing referenced in Section 2.2.
4.1.2 Mounting
The Duo camera form-factor conveniently fits with most popular action-camera accessories: there
are many available commercial off-the-shelf (COTS) gimbals and mounts available for mounting the
Duo onto different UAS airframes. Refer to the Duo Technical Drawing for additional information.
To Next Page
Loading...
