436-0100-01-10, Rev. 200 Duo User Guide
Information on this page is subject to change without notice
5.1.4 Video/Still Image
The Video and Still Images tabs configure the Duo recording mode. The system cannot capture a
still image during recording of video (or vice versa). The type of video or image files can be
configured in Settings.
5.1.4.1 Video
Video recordings can record either visible, infrared, or both simultaneously. File type settings are
adjustable in the Settings screen.
5.1.4.2 Still Images
Configures image capture at a user-selectable interval from one frame per second (slider setting of
“1s”) to one frame every 60 seconds (slider setting of “60s”). Duo can be configured to record visible
and IR as separate data files or as one combined FLIR Radiometric JPEG file.
Use the “Single” slider setting (far left) to record a single still image.
Figure 10: Video/Still Images and Record, shown in Still Images mode at 5-second intervals.