Turn Off Camera’s Bluetooth: Powers down the Bluetooth radio on the
camera. The camera will normally disable the Bluetooth after two minutes
of inactivity. See Persistent Bluetooth.
Serial No. – Serial number of the Duo camera currently connected to the
app. A “D” indicates a Duo, while a “DR” indicates a Duo R.
Part No. – FLIR part number of the Duo camera currently connected to
the app.
Firmware Version – Version of firmware currently loaded in the Duo
camera.
FW Upgrade Version - Detects if a camera upgrade file exists on the µSD
card. If one is available, the “Upgrade Available” dialog will start. Choose
“Continue” to begin the firmware upgrade process. See Appendix A for
details on how to upgrade camera firmware.
App Version - Version of software currently loaded on the mobile device.
App Upgrade Version – If the mobile device is connected to the Internet,
the Duo app will automatically search for any available app updates. If
one exists, the user will have the option to update by following the link to
the FLIR web page.
Terms and Conditions – Legal statements pertaining to the Duo product
and FLIR UAS App
Reset To Factory Defaults – Resets settings in the Duo camera to original
factory configuration. This is required during most FW updates as the
internal memory map will change as new features are added.
6 PWM, MAVLink, and TCP/IP Operation
6.1 PWM
6.1.1 Connecting to a PWM Compatible Flight Controller
The FLIR Duo camera is software- and connector-compatible with standard
R/C PWM controllers using the MiniUSB pinouts. An illustrative PWM
implementation connection is described in Table 2. Other flight controllers
or I/O modules may require different cables or connectors. Refer to the FLIR
Duo Technical Drawing for detailed information.
To Next Page
Loading...
