436-0100-01-10, Rev. 200 Duo User Guide
Information on this page is subject to change without notice
HDMI: Select digital output stream format (through the microHDMI
port). Available options are 720p60 (60hz, 720p), 1080p30 (30hz,
1080p), and 1080p60 (60hz, 1080p). Note that this does not change
the actual recording frequency, only the display rate frequency when
connected to a digital monitor.
5.1.7.2 Accy. Port
See Section 6 for information on connecting via PWM and MAVLink.
5.1.7.3 Radiometry
The Radiometry tab provides access to all the temperature measurement
functions and settings available on the Duo R. If connecting to a standard Duo
camera, this tab will not be visible and these features are unavailable. See
FLIR’s UAS Radiometry Tech Note (see Section 2.2 for the link) for a detailed
discussion on how to obtain accurate temperature readings for UAS
applications.
Figure 12. Radiometry Tab
Temperature Unit – Units of measure displayed on the analog video.
Select between Celsius and Fahrenheit.
To Next Page
Loading...
