436-0100-01-10, Rev. 200 Duo User Guide
Information on this page is subject to change without notice
5.1 Home Screen
When launched, the FLIR UAS APP will automatically identify local FLIR UAS cameras; Confirm that
Bluetooth is enabled on your Duo device, then select the camera from the camera select screen. After
connecting to the camera, the Home screen will be displayed. The Home screen shows camera status
and allows the user to adjust the more frequently-used camera settings. The current PWM states
are also displayed at the top of the Home screen.
Note: The “Measure” section allows for control over parameters related to radiometry, and will only
appear for Duo R users.
Figure 7. Home Screen
To Next Page
Loading...
