FLIR Duo - Display Video Mode; Figure 9. Video Display Mode Selection

FLIR Duo User Guide
436-0100-01-10, Rev. 200 Duo User Guide
Information on this page is subject to change without notice
16
5.1.3 Display Video Mode
The Duo streams analog or HDMI video from the output ports. Selection of the display video mode
toggles between a Visible stream only, thermal infrared (IR) stream only, and a Picture-In-Picture
stream that shows both visible and thermal. Note that this setting does NOT impact what video is
recorded to disk – see the “Settings” -> “Main” -> “Recorded Video” setting for information on that
feature.
This feature will also impact the image thumbnail for the Radiometric JPEG file format: set to “IR”
to use the IR imagery as the thumbnail, or set to “Visible” or “Picture-In-Picture” for a visible image
thumbnail. Note that both IR & Visible image components are still recorded, and accessible through
FLIR Tools.
Figure 9. Video Display mode selection