FLIR Duo - Radiometry File Formats; MAVLink; Connecting to a MAVLink Compatible Flight Controller

FLIR Duo User Guide
436-0100-01-10, Rev. 200 Duo User Guide
Information on this page is subject to change without notice
23
5.1.7.3.1 Radiometry File Formats
The different available file formats have different characteristics with regards
to recording radiometric data, as follows:
- Video (8-bit H264) – If spot meter is enabled, this format will record the spot
meter reading from the center of the screen. This video is not editable for post-
processing
- Video (14-bit TIFF Sequence) – This video format will record temperature
values for every pixel. It can be processed using many different software tools,
such as FLIR Tools, ResearchIR, ImageJ, MATLAB, and others.
o To convert the pixel values to degrees Celsius, multiply the entire image
by 0.01 and then subtract 273.15
- Photo (Radiometric JPEG) – This photo format will record temperature values
for every pixel. It can be processed using FLIR Tools and ResearchIR
o A major benefit to this file format is that all radiometry parameters, such
as emissivity and subject distance, can be edited in post-processing. This
is not true for the TIFF file formats.
- Photo (14-bit TIFF) – This photo format will record temperature values for every
pixel.
o To convert pixel values to degrees Celsius, multiply the entire image by
0.01 and then subtract 273.15.
5.1.7.4 About
The “About” screen provides information on the current software installed on
the Duo, as well as the App version.