Fluke 1560 Black Stack - Status Commands

6.5.8 Module Commands
This group of commands (Table 20) can be used to determine the module con
-
figuration and to communicate directly with module devices.
6.5.8.1
SYSTem:CONFigure:CDEVice?
This query command returns the number of installed communication devices.
Example command: SYST:CONF:CDEV?
Example response: 3
6.5.8.2 SYSTem:CONFigure:COMMunicate[n]:DADDress?
This query command returns the device address (number of the device within
its module) of a given communication device. The communication device num
-
ber is given by the COMM suffix n. Communication devices are assigned num
-
bers sequentially starting with 1 for the base serial port. The command
1560 Thermometer Readout
User’s Guide
94
Command Action
SYSTem:CONFigure:CDEVice? Query number of communication devices
SYSTem:CONFigure:COMMunicate[n]:DADDress? Query device address of communication device
SYSTem:CONFigure:COMMunicate[n]:MADDress? Query module address of communication device
SYSTem:CONFigure:ICHannel? Query number of input channels
SYSTem:CONFigure:IDEVice? Query number of input devices
SYSTem:CONFigure:INPut[n]:DADDress? Query device address of input device
SYSTem:CONFigure:INPut[n]:MADDress? Query module address of input device
SYSTem:CONFigure:MNUMber? Query number of modules
SYSTem:CONFigure:MODule[n]:DEVice[n]
:INFormation?
Query device information
SYSTem:CONFigure:MODule[n]:DNUMber? Query number of devices in module
SYSTem:CONFigure:MODule[n]:INFormation? Query module information
SYSTem:CONFigure:OCHannel? Query number of output channels
SYSTem:CONFigure:ODEVice? Query number of output devices
SYSTem:CONFigure:OUTPut[n]:DADDress? Query device address of output device
SYSTem:CONFigure:OUTPut[n]:MADDress? Query module address of output device
SYSTem:CONFigure:PDEVice? Query number of printer devices
SYSTem:CONFigure:PRINter[n]:DADDress? Query device address of printer device
SYSTem:CONFigure:PRINter[n]:MADDress? Query module address of printer device
SYSTem:MODule[n]:DEVice[n]:READ?
nd
Read data from a module device
SYSTem:MODule[n]:DEVice[n]:WRITe
nd[,rameter]
Write data to a module device
Table 20 Module Commands