Fluke 1560 Black Stack - SRE <Numeric_Value; Table 22 Status Commands

6.5.10.6
*OPC?
This query command returns “1” as soon as all other pending command opera
-
tions are completed. Since all commands are sequential for this instrument this
command is unnecessary.
6.5.10.7 *SRE <numeric_value>
This command sets the Service Request Enable Register. This register deter
-
mines which event bits of the Status Byte Register affect the MSS Master Sum
-
mary Status message bit of the Status Byte Register and generate a service
request with the IEEE-488 interface. If any event bit of the Status Byte Register
is set (1) while its corresponding mask bit of the Service Request Enable Regis
-
ter is set, the MSS Master Summary Status message bit of the Status Byte Reg
-
ister will be set and a service request generated. The value of the
<numeric_value> parameter is a number from 0 to 255 that is the sum of the bi
-
nary-weighted values of each mask bit. The Status Byte Register is described in
1560 Thermometer Readout
User’s Guide
104
Command
Action
*CLS Clear status
*ESE <numeric_value> Set Standard Event Status Enable Register
*ESE? Query Standard Event Status Enable Register
*ESR? Query Standard Event Status Register
*OPC Enable Operation Complete message
*OPC? Query Operation Complete flag
*SRE <numeric_value> Set Service Request Enable Register
*SRE? Query Service Request Enable Register
*STB? Query Status Byte
*TST? Perform self-test and return status
*WAI Wait to continue
STATus:OPERation:CONDition? Query Operation Status Condition Register
STATus:OPERation:ENABle <numeric_value> Set Operation Status Event Enable Register
STATus:OPERation:ENABle? Query Operation Status Event Enable Register
STATus:OPERation[:EVENt]? Query Operation Status Event Register
STATus:PRESet Set status registers to defaults
STATus:QUEStionable:CONDition? Query Questionable Status Condition Register
STATus:QUEStionable:ENABle <numeric_value> Set Questionable Status Event Enable Register
STATus:QUEStionable:ENABle? Query Questionable Status Event Enable Register
STATus:QUEStionable[:EVENt]? Query Questionable Status Event Register
STATus:QUEue[:NEXT]? Query system error message
SYSTem:ERRor? Query system error message
Table 22 Status Commands