1560 Thermometer Readout
User’s Guide
164
GPIB (IEEE-488) interface
Capability IEEE-488.2, 1992
SH1, complete source handshake capability
AH1, complete acceptor handshake capability
T6, basic talker, serial poll, no talk-only capability, unaddress if MLA
TE0, no extended-talk capability
L4, basic listener, no listen-only capability, unaddress if MTA
LE0, no extended-listen capability
SR1, complete serial poll capability
RL0, no remote-local capability
PP0, no parallel poll capability
DC1, complete device clear capability
DT0, no device trigger capability
C0, no control capability
E2, three-state drivers
Parallel (Centronics) printer interface
Connector 25-pin subminiature D
Serial (RS-232) interface
Connector 9-pin subminiature D
baud rate 1200 to 19200
Protocol 8 data bits, 1 stop bit, no parity
Analog output
Number of channels 1
Connector two-terminal screw clamp
Voltage range –1.25 to +1.25V
Voltage resolution 0.0006V
Digital resolution 12 bits
Maximum source resistance
1
Ω
Maximum output current 2 mA
Linearity ±0.0006V
Typical accuracy
†
±2% ±0.02V
Isolation grounded
Recommended operating temperature range 18 to 28°C (64 to 82°F)
Absolute operating temperature range 5 to 35°C (40 to 95°F)
Weight 2.2 lbs. (1 kg.)
†
Accuracy of the analog output can be significantly improved by calibration
Table 30 3560 Specifications
To Next Page
Loading...
