SELECT THE TEMPERATURE UNITS
UNITS: C LR
Measurements can also be displayed as resistance or voltage in ohms or volts.
Use the CONVERSION options with the EDIT PROBE soft-key function in
the PROBE menu to select resistance or voltage rather than temperature for a
particular probe (see Section 5.2.1).
5.5.2 Time
The TIME soft-key is used to set the time-of-day clock. The time is displayed
on the screen and printed with measurement data. A window appears allowing
you to set the time and date. Use the numeric keys or the LR buttons as ap-
propriate for the parameter type. Press ENTER to set the value. Press EXIT to
exit.
SET THE TIME
HOURS: 11
MINUTES: 14
AM/PM: AM
DAY: 1
MONTH: 1
YEAR: 99
5.5.3 Password
The PASSWORD soft-key function allows you to select menu password pro
-
tection options and change the password. In order to access this function you
must enter the current four-digit password. A screen appears requesting the
password. The default password is “1560”.
1560 Thermometer Readout
User’s Guide
58
To Next Page
Loading...
